The probe clip holder is used to hold AFM probes that are not pre-mounted on a substrate. It is designed for use with the Pacific Nanotechnology AFM scanners. The probe is held on the metal substrate with a clip. Forcing the clip into an open position is best done with cantilever mounting tool # P-000-0005-0.
The probe clip holder can be used with most commercially available cantilevers. The dimensions for the substrate that holds the cantilever are:
Dimension |
Value |
Width (W) |
1.6 mm |
Length (L) |
3.4 mm |
Thickness (T) |
.32 mm |
|
print now
