The probe clip holder is used to hold AFM probes that are not pre-mounted on a substrate. It is designed for use with the
Pacific Nanotechnology AFM scanners. The probe is held on the metal substrate with a clip. Forcing the clip into an open
position is best done with cantilever mounting tool # P-000-0005-0.
Figure 1: Physical Probe Illustration
Figure 2: Optional Mounting Tool
The probe clip holder can be used with most commercially available cantilevers. The dimensions for the substrate that
holds the cantilever are:
Dimension
Value
Width (W)
1.6 mm
Length (L)
3.4 mm
Thickness (T)
.32 mm
3350 Scott Blvd. #29, Santa Clara, CA 95054
Phone: 1-800-246-3704 Direct: 408-982-9492 Fax: 408-982-9151
